AR RMW2.2G24EZ-W-SP Pressure Washer Pump

AR (ANNOVI REVERBERI) VERTICAL SHAFT PRESSURE WASHER PUMP WITH EZ START VALVES

WITH SPACERS FOR LONG SHAFT PUMPS

(WILL REQUIRE LONGER MOUNTING BOLTS WHICH YOU CAN OBTAIN AT A HARDWARE STORE)

2.2 GPM | 2400 PSI | 3400 RPM | GAS ENGINE FLANGE

BUILT-IN PRESSURE CONTROL & CHEMICAL INJECTOR

PHYSICAL SIZE: CLICK “TECHNICAL SPECS” TAB ABOVE

INPUT: FEMALE GARDEN HOSE | OUTPUT: 22MM/14MM MALE (ACCEPTS FEMALE SCREW CONNECT)

CONVENIENT CONNECTION TO MOST 7/8" SHAFT ENGINES

PUMP IS PREFILLED WITH OIL | THERMAL RELIEF VALVE IS INCLUDED

COVERED BY AR ONE YEAR WARRANTY FOR DETAILS CLICK: AR WARRANTY

FITS MANY RESIDENTIAL MACHINES SEE “EXTENDED INFORMATION”

TO CONFIRM THIS IS THE CORRECT PUMP FOR YOUR MACHINE: CLICK HERE

AVAILABILITY: IN STOCK

THIS PUMP IS COMMONLY FOUND ON RESIDENTIAL USE PRESSURE WASHERS.  THESE MACHINES ARE MADE BY SEVERAL MANUFACTURES UNDER NUMEROUS BRAND NAMES.  A PARTIAL LIST OF THE BRAND NAMES IS BELOW.  THIS PUMP WILL FIT MANY OF THOSE UNITS.  THIS PUMP IS MOST OFTEN USED ON MACHINES WHERE THE WATER CONNECTIONS ARE AT THE FRONT OF THE MACHINE.  CALL OR EMAIL US IF YOU ARE NOT SURE THIS IS THE PUMP YOU NEED.

THIS PLUNGER PUMP WILL PUMP UP TO 2.2 GPM AT 2400 PSI. IT SPINS AT 3400 RPM IN A DIRECT DRIVE SYSTEM COUPLED WITH A GASOLINE ENGINE. THE MATCHING FLANGE PROVIDES CONVENIENT CONNECTION TO MOST 7/8” SHAFT ENGINES. THE HOLLOW SHAFTED PUMP INCLUDES A BUILT-IN PRESSURE CONTROL VALVE, AND CHEMICAL INJECTION SYSTEM.

BRIGGS, BRIGGS & STRATTON, BRUTE, BSPP ELITE, CLEAN SHOT, COMPANION, CRAFTSMAN, DELTA, DEVILBISS, DEWALT, DIAMOND,  DR, EXCELL, GENERAC, HUSKY, HUSQVARNA, JOB BOSS, JOHN DEERE, MAXUS, MURRAY, PORTER CABLE, POWER BOSS, SEARS, SIMPLICITY, SPEED CLEAN,  TASK FORCE, TROY-BILT, VOX, WATER BLASTER

Use only AR64545 oil for the AR RM, XJ, SJ and BK Series pumps only: Do NOT change oil. Use oil only to add if low. This oil is a specially formulated synthetic with special additives for the demands of the RM, XJ, SJ and BK pump series. No other oil is factory approved for these pumps, and could result in pump failure.