AR RMW2.5G26D-F7 Pressure Washer Pump

AR (ANNOVI REVERBERI) 7/8" VERTICAL SHAFT PRESSURE WASHER PUMP WITH 609A-SAE FLANGE – SEE EXTENDED INFORMATION FOR

APPROPRIATE APPLICATION INFO.

2.5 GPM | 2600 PSI | 3400 RPM | BRASS HEAD

GAS ENGINE FLANGE MOUNTS WITH WATER CONNECTIONS FACING FRONT, REAR OR SIDE

BUILT-IN PRESSURE CONTROL & CHEMICAL INJECTOR

PHYSICAL SIZE: CLICK “TECHNICAL SPECS” TAB ABOVE

INPUT: FEMALE GARDEN HOSE | OUTPUT: 22MM/14MM MALE (ACCEPTS FEMALE SCREW CONNECT)

CONVENIENT CONNECTION TO 7/8" X 2.8" LONG SHAFT

PUMP IS PREFILLED WITH OIL | INCLUDES A THERMAL RELIEF VALVE

COVERED BY AR ONE YEAR WARRANTY FOR DETAILS CLICK: AR WARRANTY

FITS A NUMBER OF RESIDENTIAL MACHINES USING THE BRIGGS STRATTON ENGINE WITH THE LONG SHAFT (APX 3") SEE “EXTENDED INFORMATION”

TO CONFIRM THIS IS THE CORRECT PUMP FOR YOUR MACHINE: CLICK HERE

AVAILABILITY: IN STOCK

THIS PUMP HAS THE 609A-SAE FLANGE WHICH FITS THE LONG SHAFT (APX. 3”) FOUND ON SOME ENGINES.  IT MOUNTS USING THE INNER 4 B0LT HOLE PATTERN AS OPPOSED TO THE OUTER 3 BOLT ENGINE MOUNT PATTERN.  REQUIRES THE LONG SHAFT.  WILL NOT WORK WITH THE STANDARD SHORT SHAFT. (SEE OUR "PUMP SELECTOR ASSISTANT" FOR HOW TO MEASURE SHAFT LENGTH.)

THIS PUMP IS FOUND ON RESIDENTIAL USE PRESSURE WASHERS USING ENGINES WITH THE LONG SHAFT (APX 3”).  THESE MACHINES ARE MADE BY MANUFACTURES UNDER DIFFERENT BRAND NAMES.  CALL OR EMAIL US IF YOU ARE NOT SURE THIS IS THE PUMP YOU NEED.

THIS PLUNGER PUMP WILL PUMP UP TO 2.5 GPM AT 2600 PSI. IT SPINS AT 3400 RPM IN A DIRECT DRIVE SYSTEM COUPLED WITH A GASOLINE ENGINE. THE MATCHING FLANGE PROVIDES CONVENIENT CONNECTION TO MOST 7/8”  LONG SHAFT ENGINES. THE HOLLOW SHAFTED PUMP INCLUDES A BUILT-IN PRESSURE CONTROL VALVE, AND CHEMICAL INJECTION SYSTEM.

BRIGGS, BRIGGS & STRATTON, BRUTE, BSPP ELITE, CLEAN SHOT, COMPANION, CRAFTSMAN, DELTA, DEVILBISS, DEWALT, DIAMOND,  DR, EXCELL, GENERAC, HUSKY, HUSQVARNA, JOB BOSS, JOHN DEERE, MAXUS, MURRAY, PORTER CABLE, POWER BOSS, SEARS, SIMPLICITY, SPEED CLEAN,  TASK FORCE, TROY-BILT, VOX, WATER BLASTER

Use only AR64545 oil for the AR RM, XJ, SJ and BK Series pumps only: Do NOT change oil. Use oil only to add if low. This oil is a specially formulated synthetic with special additives for the demands of the RM, XJ, SJ and BK pump series. No other oil is factory approved for these pumps, and could result in pump failure.