Legacy 26/30 Replacement Pump for Karcher
The Karcher Legacy 26/30 pressure washer pump features a 3/4-inch horizontal-shaft and delivers 2.6 GPM of solution at 3000 PSI when turning at 3400 RPM. The water supply input is on the right side of the pump, with the outlet located on the left. It features a thermal relief valve and chemical pickup barb.
The Legacy 26/30 axial pump is sold as a replacement pump for many Karcher residential pressure washer models and also for a long list of other brands, especially equipment sold through mass merchandisers. This includes Sears, Craftsman, Delta, Murray, Porter Cable and Briggs & Stratton, among others. This Karcher 3000 PSI pressure washer pump unit comes pre-filled with oil and includes a limited one-year parts and labor warranty.
THIS KARCHER PUMP REPLACES NUMEROUS PREVIOUS MODELS USED ON
CONSUMER MACHINES. IF YOU WOULD LIKE TO CONFIRM IT IS THE RIGHT
ONE FOR YOUR MACHINE CLICK HERE
2.6 GPM | 3000 PSI | 3400 RPM | GAS ENGINE FLANGE
BRASS HEAD | INPUT ON RIGHT OF PUMP OUTPUT ON LEFT
INPUT: FEMALE GARDEN HOSE | OUTPUT: 22MM/14MM MALE (ACCEPTS FEMALE SCREW CONNECT)
INCLUDES THERMAL RELIEF VALVE AND CHEMICAL/SOAP PICK UP BARB
PUMP COMES PREFILLED WITH OIL
COVERED BY KARCHER ONE YEAR WARRANTY FOR DETAILS CLICK: KARCHER WARRANTY
SAME PUMP AS #8.920-004.0, #9.120-021.0, AND #9.120-032.0
REPLACEMENT PUMP FOR KARCHER AND OTHER RESIDENTIAL PRESSURE WASHERS SOLD BY MASS MERCHANDISERS
TO CONFIRM THIS IS THE CORRECT PUMP FOR YOUR MACHINE: CLICK HERE
USE SIZE 3.5 NOZZLES FOR BEST RESULTS 17.0163
AVAILABILITY: IN STOCK
THIS TYPE OF PUMP CAN BE FOUND ON SUCH MACHINE AS: BRIGGS, BRIGGS & STRATTON, BRUTE, BSPP ELITE, CLEAN SHOT, COMPANION, CRAFTSMAN, DELTA, DEVILBISS, DEWALT, DIAMOND, DR, EXCELL, GENERAC, HUSKY, HUSQVARNA, JOB BOSS, JOHN DEERE, KARCHER, MAXUS, MURRAY, PORTER CABLE, POWER BOSS, SEARS, SIMPLICITY, SPEED CLEAN, TASK FORCE, TROY-BILT, VOX, WATER BLASTER
Karcher Legacy Axial Pump Warranty – Karcher axial pumps are warranted to the original purchaser to be free of defects in material and workmanship under normal use for the periods specified as follows: The internal components of the oil-end of the Karcher axial pumps have a 1 year warranty. All other components, excluding normal wear items are warranted for one year for parts and labor.
This warranty excludes any defects caused by improper or negligent operation or installation, accident, abuse, misuse, neglect, including the failure of the customer to comply with any recommended maintenance.
|
Prompt and Reasonably Priced 
