THE LIBERTY SERIES PRESSURE WASHERS ARE THE TOUGHEST GASOLINE DIRECT DRIVE COLD WATER MACHINES IN THE KARCHER LINE UP
3500 PSI | 3.8 GPM | HONDA GX390 ENGINE
OPTIONAL HOSE REEL - SEE "TECHNICAL SPECS" TAB ABOVE
KARCHER KS TRIPLEX PUMP | E-Z PULL STARTING | PNEUMATIC TIRES
50’ DURABLE WIRE-BRAID HOSE | DOWNSTREAM CHEMICAL INJECTOR
POWDER COATED CHASSIS BASE AND 1 1/4" CHROME PLATED HANDLES
COMMERCIAL DUTY GUN AND WAND | UL-1776 SAFETY CERTIFICATION
FOR COMPLETE FEATURES AND DETAILS PLEASE CLICK HERE
COVERED BY KARCHER COMMERCIAL PRESSURE WASHER WARRANTY
FOR DETAILS CLICK:
KARCHER WARRANTY
Note: This item ships by common carrier truck not UPS.
AVAILABILITY: IN STOCK
OPTIONAL KARCHER E-Z HOSE REEL
HOLDS 100' OF 3/8" ONE WIRE HOSE
DOES NOT INCLUDE ADDITIONAL HOSE ONLY THE STANDARD 50' IS INCLUDED WITH THE PRESSURE WASHER
SHIPS SEPARATELY AND REQUIRES INSTALLATION
These are the toughest gasoline-powered, directdrive cold water pressure washers in the Kärcher line with cleaning power of up to 3.8 GPM and 3500 PSI. Powered by industrial-grade Honda engines, these models feature tri-plunger, oil-bath Kärcher pumps, pneumatic tires for easy maneuvering, steel chrome handles, steel frame and base with an all-weather powder-coat finish, hose rack and high pressure hose with burst protection. For a compact but rugged and affordable cold water pressure washer, they don’t come tougher than Kärcher’s cold water pressure washers.
Compact, Gasoline-Powered, Cold Water Pressure Washer for Outdoor Commercial and Industrial Applications • Rugged chassis base painted with an epoxy powder coat finish for all-weather protection • Five conveniently mounted, quick-couple spray nozzles for varying fan spray • Reliable Honda GX engine with two-year warranty; lowoil alert and silent-tone muffler (9 and 13 HP models also have valve for easy pull-start) Industrial-grade, tri-plunger, oil-bath Kärcher high pressure pump with forged brass head and ceramic pistons; backed by 7-year warranty • Insulated, high-pressure trigger gun for hours of fatiguefree
cleaning • 50' durable wire-braid hose rated for 3000 or 4500 PSI; with hose guard for burst protection • Inlet strainer protects pump from debris in the water source ETL certified to the rigid UL-17 76 safety standards • Convenient front and back 11/4" chrome-plated handles
to assist in lifting and moving the pressure washer • Easy-to-attach downstream detergent
injector with brass soap nozzle • Warning and operating instruc ions in three languages for owner liability protection Insulated stainless steel wand with quickcouple connectors for easy attachment of high-pressure nozzles • Safety thermal pump saver valve protects
against hot-water damage by venting recirculated water • 10" tubed pneumatic tires for easy maneuvering on all terrains and to absorb vibration • Rubber feet to absorb vibration and keep the unit from “walking” • Conveniently located gun and hose holder attached to the chrome handle •
Manufactured To Cleaning Equipment Trade Association Performance Standards
Cleaning Equipment Trade Association
Karcher Warranty:
All Kärcher commercial pressure washers are warranted by Kärcher to the original purchaser to be free from defects in materials and workmanship under normal use, for the periods specified below. This Limited Warranty, subject to the exclusions shown below, is calculated from the date of the original purchase, and applies to the original components only. Any parts replaced under this warranty will assume the remainder of the pressure washer’s warranty period.
Five YEAR PARTS AND ONE YEAR LABOR WARRANTY
Components manufactured by Kärcher, such as frames, handles, float tanks, fuel tanks, belt guards, and heating coils. Internal components on the oil-end of Kärcher axial pumps have a 5 year warranty. Kärcher crankshaft pumps have a 7 year warranty on
non-wear parts. Heating coils are pro-rated at 25% after 2 years. Stainless steel coils have a 10 year warranty.
ONE YEAR PARTS AND ONE YEAR LABOR WARRANTY
All other components, excluding normal wear items as described below, will be warranted for one year on parts and labor. Parts and labor warranty on these parts will be for one year regardless of the duration of the original component manufacturer’s parts
warranty.
|
