Mecline VRF2 3625 PSI Bolt-On Unloader

MECLINE VRF2 BOLT-ON UNLOADER UPPER

3625 PSI | 8.0 GPM | 194 F

NO INJECTOR | FORGED BRASS BODY

3/8" FPT INLET | 3/8” MPT OUTLET

NOTE THIS IS THE UPPER PORTION ONLY SELECT THE LOWER PORTION
BASED ON YOUR PUMP SERIES:

COMET AW, BW, LW AND ZW CLICK HERE: 8108.2574.00

COMET FW, FW2 AND HW CLICK HERE: 8108.9158.00

ELIMINATES NEED FOR BYPASS HOSE | INTERNAL SPRING | COMPACT DESIGN

FOR COMET AW, BW, FW, FW2, HW, LW AND ZW SERIES PUMPS

AVAILABILITY: IN STOCK

MV # 4072401007

The spray gun and unloader make up a two-part valve system that directs water into the bypass and back to the pump or float tank.  The spray gun shuts off the flow of water causing the unloader to re-circulate the water back into the inlet side of the pump.  This is called sending the water to bypass.  Pressure actuated unloaders are opened by the increase in pressure occurring when the valve in the spray gun is closed.  Flow actuated valves send the water into bypass when flow drops.  

This is a pressure actuated model.